AS9120B, ISO 9001:2015, and FAA 0056B Accredited

Part 3006W-1-102 with NSN 5905-00-250-6279 by Bourns Inc - Submit a Quote

Mfg Part Number: 3006W-1-102


Manufacturer: Bourns Inc

CAGE Code: 32997

Alternate P/N: 3006W1102



FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

INC Code: 37405

Whether you are in need of military aviation parts, NSN components, or various forms of aerospace and defense parts, Aerospace Store is a single-sourcing solution with over 2 billion product listings readily available for purchase at any time with competitive pricing. You have reached the Request for Quote (RFQ) page for part number 3006W-1-102, a Bourns Inc component we feature that is listed with the NSN 5905002506279 and item name “Resistor Variable Nonwire Wound.” For further identification, part number 3006W-1-102 was also specifically produced under CAGE Code 32997 and belongs to Federal Supply Class (FSC) 5905 Resistors. If you would like to receive specific options for procurement that have been tailored to your unique needs and restrictions alike, we ask that you please fill out and submit the form provided on this page with as much information as you can. Once our team has a chance to receive and review your offered details, a dedicated account manager will be in touch shortly after.

PRODUCT DETAILS “*” Required fields are compulsory

CONTACT INFORMATION

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We will not share your information to any third parties.

  • Upload RFQ SHEET
  • If you have more than one item, upload your spreadsheet here

Items like part number 3006W-1-102 and others are all readily available with short lead times, and we boast rigorous quality-assurance practices to guarantee the caliber and reliability of every purchase made on our website. Beyond quality, we are fully committed to customer satisfaction, regularly exceeding industry expectations to ensure that we thoroughly and efficiently address every need. If you happen to be facing a time constraint that demands more specialized fulfillment solutions, please give us a call or email at any time to discuss the options we can provide. We are available around the clock and are always happy to assist, so do not hesitate to reach out for part number 3006W-1-102 and other various items of interest.

NSN Information for Part Number 3006W-1-102 with NSN 5905-00-250-6279, 5905002506279

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-250-6279

Item Description:

Resistor Variable Nonwire Wound

59050025062790NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberiscrnvcrnccHCCMSDSSADC
3006w-1-102525

Characteristics Data of NSN 5905-00-250-6279, 5905002506279

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1"
AAQLBODY STYLERECTANGULAR"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABJTTERMINAL LENGTH0.165 INCHES MINIMUM"
ABWVSHAFT DIAMETER0.100 INCHES NOMINAL"
ABXFSHAFT LENGTH0.060 INCHES NOMINAL"
ADAQBODY LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
ADATBODY WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAUBODY HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AEDXSHAFT STYLEROUND, SLOTTED"
AEDZSHAFT BEARING TYPEBEARING"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION5400.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE8.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE8.00 INCH-OUNCES"
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS"
AXGYMOUNTING METHODTERMINAL"
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM"
CBMEIII CUBIC MEASURE0.040 CUBIC INCHES"
CQCCELECTRICAL RESISTANCE PER SECTION1.0 PERCENT, RATED AMPERES C AND BETTER FLOORING"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG5400.0 NOMINAL"
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.190 NOMINAL MILS AND 0.210 NOMINAL CENTIMETERS"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.75 7TH SECONDARY QUALITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION"
CSDLUNABLE TO DECODEUNABLE TO DECODE"
FEATSPECIAL FEATURESSEALED"
TTQYTERMINAL TYPE AND QUANTITY3 PIN"
AAPNSECTION QUANTITY1"
AAQLBODY STYLERECTANGULAR"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABJTTERMINAL LENGTH0.165 INCHES MINIMUM"
ABWVSHAFT DIAMETER0.100 INCHES NOMINAL"
ABXFSHAFT LENGTH0.060 INCHES NOMINAL"
ADAQBODY LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
ADATBODY WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAUBODY HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AEDXSHAFT STYLEROUND, SLOTTED"
AEDZSHAFT BEARING TYPEBEARING"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION5400.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE8.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE8.00 INCH-OUNCES"
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS"
AXGYMOUNTING METHODTERMINAL"
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM"
CBMEIII CUBIC MEASURE0.040 CUBIC INCHES"
CQCCELECTRICAL RESISTANCE PER SECTION1.0 PERCENT, RATED AMPERES C AND BETTER FLOORING"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG5400.0 NOMINAL"
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.190 NOMINAL MILS AND 0.210 NOMINAL CENTIMETERS"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.75 7TH SECONDARY QUALITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION"
CSDLUNABLE TO DECODEUNABLE TO DECODE"
FEATSPECIAL FEATURESSEALED"
TTQYTERMINAL TYPE AND QUANTITY3 PIN"

  Corresponding National Stock Number to 3006W-1-102

Part 3006W-1-102 With Different Manufacturers

3006W-1-102

3006W-1-102

USA Flag

We are proud to supply every branch of the United States military


Why Choose Us?

Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable parts

Semiconductor's Certifications and Memberships

Thank You for Visiting.

We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

The only independent
distributor with a
NO CHINA SOURCING Pledge
  • All parts are stocked in the USA.
  • All parts are shipped from the USA.
  • All shipments must comply with U.S.A export laws.
  • No exceptions.
Fhf “We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.