AS9120B, ISO 9001:2015, and FAA 0056B Accredited

Part 754-6041 with NSN 5905-00-399-7762 by Bunker Ramo Corp Amphenol Controls Div - Submit a Quote

Mfg Part Number: 754-6041


Alternate P/N: 7546041



FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

INC Code: 37408

Whether you are in need of military aviation parts, NSN components, or various forms of aerospace and defense parts, Aerospace Store is a single-sourcing solution with over 2 billion product listings readily available for purchase at any time with competitive pricing. You have reached the Request for Quote (RFQ) page for part number 754-6041, a Bunker Ramo Corp Amphenol Controls Div component we feature that is listed with the NSN 5905003997762 and item name “Resistor Variable Wire Wound Pre.” For further identification, part number 754-6041 was also specifically produced under CAGE Code 12205 and belongs to Federal Supply Class (FSC) 5905 Resistors. If you would like to receive specific options for procurement that have been tailored to your unique needs and restrictions alike, we ask that you please fill out and submit the form provided on this page with as much information as you can. Once our team has a chance to receive and review your offered details, a dedicated account manager will be in touch shortly after.

PRODUCT DETAILS “*” Required fields are compulsory

CONTACT INFORMATION

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We will not share your information to any third parties.

  • Upload RFQ SHEET
  • If you have more than one item, upload your spreadsheet here

Items like part number 754-6041 and others are all readily available with short lead times, and we boast rigorous quality-assurance practices to guarantee the caliber and reliability of every purchase made on our website. Beyond quality, we are fully committed to customer satisfaction, regularly exceeding industry expectations to ensure that we thoroughly and efficiently address every need. If you happen to be facing a time constraint that demands more specialized fulfillment solutions, please give us a call or email at any time to discuss the options we can provide. We are available around the clock and are always happy to assist, so do not hesitate to reach out for part number 754-6041 and other various items of interest.

NSN Information for Part Number 754-6041 with NSN 5905-00-399-7762, 5905003997762

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-399-7762

Item Description:

Resistor Variable Wire Wound Pre

59050039977620N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberiscrnvcrnccHCCMSDSSADC
754-6041295

Characteristics Data of NSN 5905-00-399-7762, 5905003997762

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY3"
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
AAVLPILOT DIAMETER1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM"
AAVMPILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
ABPAUNDERCUT DIAMETER1.875 INCHES MAXIMUM"
ABPCUNDERCUT WIDTH0.0730 INCHES MINIMUM"
ABPMBODY DIAMETER1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM"
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL"
ABXFSHAFT LENGTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM"
ADAQBODY LENGTH3.079 INCHES MAXIMUM"
AECZMOUNTING LIP DIAMETER1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM"
AEDAMOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM"
AEDXSHAFT STYLEROUND"
AEDZSHAFT BEARING TYPEBALL"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE3.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE2.25 INCH-OUNCES"
AEFYSHAFT END PLAY0.005 INCHES"
AEFZSHAFT RUNOUT0.001 INCHES"
AEGALATERAL RUNOUT0.002 INCHES"
AEGBPILOT DIAMETER RUNOUT0.002 INCHES"
AEGCSHAFT RADIAL PLAY0.001 INCHES"
AFJNFRAGILITY FACTORMODERATELY RUGGED"
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGYMOUNTING METHODCLAMP RING"
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT"
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS ALL SECTIONS"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL"
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-2.00/+2.00 ALL SECTIONS"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 ALL SECTIONS"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.5 FREE AIR ALL SECTIONS"
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS TERMINAL BASE LINEARITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 ALL SECTIONS"
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION"
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS GRAPH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 ALL SECTIONS"
TESTTEST DATA DOCUMENT10001-2091272 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQYTERMINAL TYPE AND QUANTITY15 TURRET"
AAPNSECTION QUANTITY3"
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
AAVLPILOT DIAMETER1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM"
AAVMPILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
ABPAUNDERCUT DIAMETER1.875 INCHES MAXIMUM"
ABPCUNDERCUT WIDTH0.0730 INCHES MINIMUM"
ABPMBODY DIAMETER1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM"
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL"
ABXFSHAFT LENGTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM"
ADAQBODY LENGTH3.079 INCHES MAXIMUM"
AECZMOUNTING LIP DIAMETER1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM"
AEDAMOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM"
AEDXSHAFT STYLEROUND"
AEDZSHAFT BEARING TYPEBALL"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE3.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE2.25 INCH-OUNCES"
AEFYSHAFT END PLAY0.005 INCHES"
AEFZSHAFT RUNOUT0.001 INCHES"
AEGALATERAL RUNOUT0.002 INCHES"
AEGBPILOT DIAMETER RUNOUT0.002 INCHES"
AEGCSHAFT RADIAL PLAY0.001 INCHES"
AFJNFRAGILITY FACTORMODERATELY RUGGED"
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGYMOUNTING METHODCLAMP RING"
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT"
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS ALL SECTIONS"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL"
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-2.00/+2.00 ALL SECTIONS"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 ALL SECTIONS"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.5 FREE AIR ALL SECTIONS"
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS TERMINAL BASE LINEARITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 ALL SECTIONS"
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION"
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS GRAPH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 ALL SECTIONS"
TESTTEST DATA DOCUMENT10001-2091272 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQYTERMINAL TYPE AND QUANTITY15 TURRET"

  Corresponding National Stock Number to 754-6041

USA Flag

We are proud to supply every branch of the United States military


Why Choose Us?

Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable parts

Semiconductor's Certifications and Memberships

Thank You for Visiting.

We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

The only independent
distributor with a
NO CHINA SOURCING Pledge
  • All parts are stocked in the USA.
  • All parts are shipped from the USA.
  • All shipments must comply with U.S.A export laws.
  • No exceptions.
Fhf “We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.