Whether you are in need of military aviation parts, NSN components, or various forms of aerospace and defense parts, Aerospace Store is a single-sourcing solution with over 2 billion product listings readily available for purchase at any time with competitive pricing. You have reached the Request for Quote (RFQ) page for part number N3574, a Diamond Reo Truck Co component we feature that is listed with the NSN 2920005626149 and item name “Generator Engine Accessory.” For further identification, part number N3574 was also specifically produced under CAGE Code 56442 and belongs to Federal Supply Class (FSC) 2920 Engine Electrical System Components, Nonaircraft. If you would like to receive specific options for procurement that have been tailored to your unique needs and restrictions alike, we ask that you please fill out and submit the form provided on this page with as much information as you can. Once our team has a chance to receive and review your offered details, a dedicated account manager will be in touch shortly after.
Note : We will not share your information to any third parties.
Items like part number N3574 and others are all readily available with short lead times, and we boast rigorous quality-assurance practices to guarantee the caliber and reliability of every purchase made on our website. Beyond quality, we are fully committed to customer satisfaction, regularly exceeding industry expectations to ensure that we thoroughly and efficiently address every need. If you happen to be facing a time constraint that demands more specialized fulfillment solutions, please give us a call or email at any time to discuss the options we can provide. We are available around the clock and are always happy to assist, so do not hesitate to reach out for part number N3574 and other various items of interest.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-562-6149 Item Description: GENERATOR,ENGINE ACCESSORY | 2920 | 005626149 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| N3574 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.844 INCHES NOMINAL" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.874 INCHES NOMINAL" |
| AAUK | SPLINE WIDTH | 0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM" |
| ABSA | SPLINE QUANTITY | 6" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES" |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL" |
| AXFH | SPLINE LENGTH | 2.000 INCHES NOMINAL" |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 900" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0" |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 580" |
| BCGN | GROUNDING METHOD | INTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.500 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.875 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 190.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 4.250 INCHES NOMINAL" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.370 INCHES MINIMUM AND 5.380 INCHES MAXIMUM" |
| BCMG | TOP MOUNTING HOLE DIAMETER | 0.531 INCHES NOMINAL" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 3600" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 2A" |
| CMLP | THREAD QUANTITY PER INCH | 18" |
| ELEC | VOLTAGE IN VOLTS | 12.0" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.844 INCHES NOMINAL" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.874 INCHES NOMINAL" |
| AAUK | SPLINE WIDTH | 0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM" |
| ABSA | SPLINE QUANTITY | 6" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES" |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL" |
| AXFH | SPLINE LENGTH | 2.000 INCHES NOMINAL" |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 900" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0" |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 580" |
| BCGN | GROUNDING METHOD | INTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.500 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.875 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 190.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 4.250 INCHES NOMINAL" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.370 INCHES MINIMUM AND 5.380 INCHES MAXIMUM" |
| BCMG | TOP MOUNTING HOLE DIAMETER | 0.531 INCHES NOMINAL" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 3600" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 2A" |
| CMLP | THREAD QUANTITY PER INCH | 18" |
| ELEC | VOLTAGE IN VOLTS | 12.0" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
