AS9120B, ISO 9001:2015, and FAA 0056B Accredited

Part N29978PCA with NSN 3020-00-391-0927 by Hatch And Kirk Inc - Submit a Quote

Mfg Part Number: N29978PCA

Item Name: Gear Helical

Manufacturer: Hatch And Kirk Inc

CAGE Code: 55380


FSG: 30 Mechanical Power Transmission Equipment

Country: USA

NCB Code: 00

INC Code: 05464

Whether you are in need of military aviation parts, NSN components, or various forms of aerospace and defense parts, Aerospace Store is a single-sourcing solution with over 2 billion product listings readily available for purchase at any time with competitive pricing. You have reached the Request for Quote (RFQ) page for part number N29978PCA, a Hatch And Kirk Inc component we feature that is listed with the NSN 3020003910927 and item name “Gear Helical.” For further identification, part number N29978PCA was also specifically produced under CAGE Code 55380 and belongs to Federal Supply Class (FSC) 3020 Gear Pulley Sprocket and Transmission Chain. If you would like to receive specific options for procurement that have been tailored to your unique needs and restrictions alike, we ask that you please fill out and submit the form provided on this page with as much information as you can. Once our team has a chance to receive and review your offered details, a dedicated account manager will be in touch shortly after.

PRODUCT DETAILS “*” Required fields are compulsory

CONTACT INFORMATION

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We will not share your information to any third parties.

  • Upload RFQ SHEET
  • If you have more than one item, upload your spreadsheet here

Items like part number N29978PCA and others are all readily available with short lead times, and we boast rigorous quality-assurance practices to guarantee the caliber and reliability of every purchase made on our website. Beyond quality, we are fully committed to customer satisfaction, regularly exceeding industry expectations to ensure that we thoroughly and efficiently address every need. If you happen to be facing a time constraint that demands more specialized fulfillment solutions, please give us a call or email at any time to discuss the options we can provide. We are available around the clock and are always happy to assist, so do not hesitate to reach out for part number N29978PCA and other various items of interest.

NSN Information for Part Number N29978PCA with NSN 3020-00-391-0927, 3020003910927

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3020-00-391-0927

Item Description:

Gear Helical

30200039109270N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberiscrnvcrnccHCCMSDSSADC
N29978pca225

Characteristics Data of NSN 3020-00-391-0927, 3020003910927

MRCCriteriaCharacteristic
AAQLBODY STYLEWEBBED, WITH LIGHTENING HOLES"
AGJSPITCH DIAMETER10.8000 INCHES NOMINAL"
AJLATEETH QUANTITY54"
ANTPBORE STYLEPLAIN BOTH ENDS"
CQFMHARDNESS RATING10.0 ROCKWELL C MINIMUM OVERALL AND 20.0 ROCKWELL C MAXIMUM OVERALL"
CWCDNOMINAL OUTSIDE DIAMETER11.084 INCHES"
CWMWTEETH TYPESINGLE HELIX"
CWNHTOOTH FORMSTANDARD"
CWNMTOOTH DIRECTIONLEFT"
CWPPPRESSURE ANGLE20.0000 DEGREES"
CWPZHELIX ANGLE27.3217 DEGREES"
CWQLNOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.688 INCHES BOTH ENDS"
CWRMFACE NOMINAL WIDTH2.000 INCHES"
CWRSBORE NOMINAL DIAMETER2.0000 INCHES BOTH ENDS"
CWTRHUB STYLE DESIGNATOR1 STEP BOTH ENDS"
CWWHEND NOMINAL LENGTH1.375 INCHES BOTH ENDS"
CWWNEND NOMINAL DIAMETER2.997 INCHES BOTH ENDS"
CWWSFIRST STEP NOMINAL LENGTH0.063 INCHES BOTH ENDS"
CWXBFIRST STEP NOMINAL DIAMETER4.125 INCHES BOTH ENDS"
FEATSPECIAL FEATURESTWO COUNTERWEIGHTS,BOLTS,NUTS,OIL HOLES IN HUB,FIG 1 STAMPED BETWEEN TEETH ON SIDE OF GEAR 170 DEG 57 MIN CCW FROM UPPER CENTER LINE,FIG 4 STAMPED BETWEEN TEETH ON SIDE @OF GEAR 73 DEG @20 MIN CCW FROM FIG 1"
MATTIII MATERIALSTEEL OVERALL"
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL"
STYLSTYLE DESIGNATORPROTRUDING HUBS"
AAQLBODY STYLEWEBBED, WITH LIGHTENING HOLES"
AGJSPITCH DIAMETER10.8000 INCHES NOMINAL"
AJLATEETH QUANTITY54"
ANTPBORE STYLEPLAIN BOTH ENDS"
CQFMHARDNESS RATING10.0 ROCKWELL C MINIMUM OVERALL AND 20.0 ROCKWELL C MAXIMUM OVERALL"
CWCDNOMINAL OUTSIDE DIAMETER11.084 INCHES"
CWMWTEETH TYPESINGLE HELIX"
CWNHTOOTH FORMSTANDARD"
CWNMTOOTH DIRECTIONLEFT"
CWPPPRESSURE ANGLE20.0000 DEGREES"
CWPZHELIX ANGLE27.3217 DEGREES"
CWQLNOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.688 INCHES BOTH ENDS"
CWRMFACE NOMINAL WIDTH2.000 INCHES"
CWRSBORE NOMINAL DIAMETER2.0000 INCHES BOTH ENDS"
CWTRHUB STYLE DESIGNATOR1 STEP BOTH ENDS"
CWWHEND NOMINAL LENGTH1.375 INCHES BOTH ENDS"
CWWNEND NOMINAL DIAMETER2.997 INCHES BOTH ENDS"
CWWSFIRST STEP NOMINAL LENGTH0.063 INCHES BOTH ENDS"
CWXBFIRST STEP NOMINAL DIAMETER4.125 INCHES BOTH ENDS"
FEATSPECIAL FEATURESTWO COUNTERWEIGHTS,BOLTS,NUTS,OIL HOLES IN HUB,FIG 1 STAMPED BETWEEN TEETH ON SIDE OF GEAR 170 DEG 57 MIN CCW FROM UPPER CENTER LINE,FIG 4 STAMPED BETWEEN TEETH ON SIDE @OF GEAR 73 DEG @20 MIN CCW FROM FIG 1"
MATTIII MATERIALSTEEL OVERALL"
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL"
STYLSTYLE DESIGNATORPROTRUDING HUBS"

  Corresponding National Stock Number to N29978PCA

Part N29978PCA With Different Manufacturers

USA Flag

We are proud to supply every branch of the United States military


Why Choose Us?

Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable parts

Semiconductor's Certifications and Memberships

Thank You for Visiting.

We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

The only independent
distributor with a
NO CHINA SOURCING Pledge
  • All parts are stocked in the USA.
  • All parts are shipped from the USA.
  • All shipments must comply with U.S.A export laws.
  • No exceptions.
Fhf “We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.