AS9120B, ISO 9001:2015, and FAA 0056B Accredited

Part MILR8903 with NSN 5905-00-088-2750 by Miscellaneous - Submit a Quote

Mfg Part Number: MILR8903


Manufacturer: Miscellaneous

CAGE Code: 81349


FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

INC Code: 37408

Whether you are in need of military aviation parts, NSN components, or various forms of aerospace and defense parts, Aerospace Store is a single-sourcing solution with over 2 billion product listings readily available for purchase at any time with competitive pricing. You have reached the Request for Quote (RFQ) page for part number MILR8903, a Miscellaneous component we feature that is listed with the NSN 5905000882750 and item name “Resistor Variable Wire Wound Pre.” For further identification, part number MILR8903 was also specifically produced under CAGE Code 81349 and belongs to Federal Supply Class (FSC) 5905 Resistors. If you would like to receive specific options for procurement that have been tailored to your unique needs and restrictions alike, we ask that you please fill out and submit the form provided on this page with as much information as you can. Once our team has a chance to receive and review your offered details, a dedicated account manager will be in touch shortly after.

PRODUCT DETAILS “*” Required fields are compulsory

CONTACT INFORMATION

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We will not share your information to any third parties.

  • Upload RFQ SHEET
  • If you have more than one item, upload your spreadsheet here

Items like part number MILR8903 and others are all readily available with short lead times, and we boast rigorous quality-assurance practices to guarantee the caliber and reliability of every purchase made on our website. Beyond quality, we are fully committed to customer satisfaction, regularly exceeding industry expectations to ensure that we thoroughly and efficiently address every need. If you happen to be facing a time constraint that demands more specialized fulfillment solutions, please give us a call or email at any time to discuss the options we can provide. We are available around the clock and are always happy to assist, so do not hesitate to reach out for part number MILR8903 and other various items of interest.

NSN Information for Part Number MILR8903 with NSN 5905-00-088-2750, 5905000882750

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-088-2750

Item Description:

Resistor Variable Wire Wound Pre

59050008827500NB
CIICHCCESDPMICCriticalityENAC
UBA0
Part NumberiscrnvcrnccHCCMSDSSADC
Milr8903114

Characteristics Data of NSN 5905-00-088-2750, 5905000882750

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1"
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
AAVLPILOT DIAMETER1.9360 INCHES MINIMUM AND 1.9370 INCHES MAXIMUM"
AAVMPILOT LENGTH0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM"
ABHPOVERALL LENGTH1.217 INCHES MINIMUM AND 1.260 INCHES MAXIMUM"
ABPAUNDERCUT DIAMETER1.9375 INCHES MINIMUM AND 1.9385 INCHES MAXIMUM"
ABPCUNDERCUT WIDTH0.0700 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM"
ABPMBODY DIAMETER1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM"
ABWVSHAFT DIAMETER0.250 INCHES MAXIMUM"
ABXFSHAFT LENGTH0.198 INCHES MINIMUM AND 0.218 INCHES MAXIMUM"
ADAQBODY LENGTH0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM"
ADAVOVERALL DIAMETER2.099 INCHES MINIMUM AND 2.151 INCHES MAXIMUM"
AECZMOUNTING LIP DIAMETER1.9900 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM"
AEDAMOUNTING LIP DEPTH0.0680 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM"
AEDXSHAFT STYLEROUND"
AEDZSHAFT BEARING TYPEBEARING"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION319.0 MINIMUM AND 321.0 MAXIMUM"
AEFKMAXIMUM STARTING TORQUE0.60 INCH-OUNCES"
AEFYSHAFT END PLAY0.006 INCHES"
AEGALATERAL RUNOUT0.001 INCHES"
AEGBPILOT DIAMETER RUNOUT0.001 INCHES"
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGYMOUNTING METHODCLAMP RING"
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL"
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.50/+0.50 SINGLE SECTION"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-30.0/+30.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR SINGLE SECTION"
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-1.0/+1.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION"
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
TESTTEST DATA DOCUMENT81349-MIL-R-8903 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN"
TTQYTERMINAL TYPE AND QUANTITY12 SOLDER STUD"
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-8903 GOVERNMENT SPECIFICATION"
AAPNSECTION QUANTITY1"
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
AAVLPILOT DIAMETER1.9360 INCHES MINIMUM AND 1.9370 INCHES MAXIMUM"
AAVMPILOT LENGTH0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM"
ABHPOVERALL LENGTH1.217 INCHES MINIMUM AND 1.260 INCHES MAXIMUM"
ABPAUNDERCUT DIAMETER1.9375 INCHES MINIMUM AND 1.9385 INCHES MAXIMUM"
ABPCUNDERCUT WIDTH0.0700 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM"
ABPMBODY DIAMETER1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM"
ABWVSHAFT DIAMETER0.250 INCHES MAXIMUM"
ABXFSHAFT LENGTH0.198 INCHES MINIMUM AND 0.218 INCHES MAXIMUM"
ADAQBODY LENGTH0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM"
ADAVOVERALL DIAMETER2.099 INCHES MINIMUM AND 2.151 INCHES MAXIMUM"
AECZMOUNTING LIP DIAMETER1.9900 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM"
AEDAMOUNTING LIP DEPTH0.0680 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM"
AEDXSHAFT STYLEROUND"
AEDZSHAFT BEARING TYPEBEARING"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION319.0 MINIMUM AND 321.0 MAXIMUM"
AEFKMAXIMUM STARTING TORQUE0.60 INCH-OUNCES"
AEFYSHAFT END PLAY0.006 INCHES"
AEGALATERAL RUNOUT0.001 INCHES"
AEGBPILOT DIAMETER RUNOUT0.001 INCHES"
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGYMOUNTING METHODCLAMP RING"
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL"
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.50/+0.50 SINGLE SECTION"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-30.0/+30.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR SINGLE SECTION"
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-1.0/+1.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION"
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
TESTTEST DATA DOCUMENT81349-MIL-R-8903 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN"
TTQYTERMINAL TYPE AND QUANTITY12 SOLDER STUD"
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-8903 GOVERNMENT SPECIFICATION"

  Corresponding National Stock Number to MILR8903

USA Flag

We are proud to supply every branch of the United States military


Why Choose Us?

Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable parts

Semiconductor's Certifications and Memberships

Thank You for Visiting.

We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

The only independent
distributor with a
NO CHINA SOURCING Pledge
  • All parts are stocked in the USA.
  • All parts are shipped from the USA.
  • All shipments must comply with U.S.A export laws.
  • No exceptions.
Fhf “We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.