AS9120B, ISO 9001:2015, and FAA 0056B Accredited

Part MD05-03X2-3162 with NSN 5905-00-498-5873 by Sensor Systems Inc - Submit a Quote

Mfg Part Number: MD05-03X2-3162


Manufacturer: Sensor Systems Inc

CAGE Code: 04454

Alternate P/N: MD0503X23162



FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

INC Code: 37408

Whether you are in need of military aviation parts, NSN components, or various forms of aerospace and defense parts, Aerospace Store is a single-sourcing solution with over 2 billion product listings readily available for purchase at any time with competitive pricing. You have reached the Request for Quote (RFQ) page for part number MD05-03X2-3162, a Sensor Systems Inc component we feature that is listed with the NSN 5905004985873 and item name “Resistor Variable Wire Wound Pre.” For further identification, part number MD05-03X2-3162 was also specifically produced under CAGE Code 04454 and belongs to Federal Supply Class (FSC) 5905 Resistors. If you would like to receive specific options for procurement that have been tailored to your unique needs and restrictions alike, we ask that you please fill out and submit the form provided on this page with as much information as you can. Once our team has a chance to receive and review your offered details, a dedicated account manager will be in touch shortly after.

PRODUCT DETAILS “*” Required fields are compulsory

CONTACT INFORMATION

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We will not share your information to any third parties.

  • Upload RFQ SHEET
  • If you have more than one item, upload your spreadsheet here

Items like part number MD05-03X2-3162 and others are all readily available with short lead times, and we boast rigorous quality-assurance practices to guarantee the caliber and reliability of every purchase made on our website. Beyond quality, we are fully committed to customer satisfaction, regularly exceeding industry expectations to ensure that we thoroughly and efficiently address every need. If you happen to be facing a time constraint that demands more specialized fulfillment solutions, please give us a call or email at any time to discuss the options we can provide. We are available around the clock and are always happy to assist, so do not hesitate to reach out for part number MD05-03X2-3162 and other various items of interest.

NSN Information for Part Number MD05-03X2-3162 with NSN 5905-00-498-5873, 5905004985873

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-498-5873

Item Description:

RESISTOR,VARIABLE,WIRE WOUND,PRE

5905004985873N
CIICHCCESDPMICCriticalityENAC
Part NumberiscrnvcrnccHCCMSDSSADC
MD05-03X2-3162223

Characteristics Data of NSN 5905-00-498-5873, 5905004985873

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1"
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
AAVLPILOT DIAMETER0.4400 INCHES NOMINAL"
AAVMPILOT LENGTH0.0400 INCHES NOMINAL"
ABHPOVERALL LENGTH2.032 INCHES MAXIMUM"
ABPAUNDERCUT DIAMETER0.440 INCHES MAXIMUM"
ABPCUNDERCUT WIDTH0.0570 INCHES NOMINAL"
ABPMBODY DIAMETER0.510 INCHES MAXIMUM"
ABWVSHAFT DIAMETER0.125 INCHES MAXIMUM"
ABXFSHAFT LENGTH0.470 INCHES MAXIMUM"
ADAQBODY LENGTH1.272 INCHES MAXIMUM"
ADAVOVERALL DIAMETER0.510 INCHES MAXIMUM"
AECZMOUNTING LIP DIAMETER0.5000 INCHES NOMINAL"
AEDAMOUNTING LIP DEPTH0.0620 INCHES NOMINAL"
AEDXSHAFT STYLEROUND, SLOTTED"
AEDZSHAFT BEARING TYPEBALL"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION1080.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE0.60 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE0.40 INCH-OUNCES"
AEFMMAXIMUM STOP TORQUE100.00 INCH-OUNCES"
AEFZSHAFT RUNOUT0.001 INCHES"
AEGALATERAL RUNOUT0.001 INCHES"
AEGCSHAFT RADIAL PLAY0.001 INCHES"
APXHTERMINAL LOCATIONREAR END"
AXGYMOUNTING METHODCLAMP RING"
CQCCELECTRICAL RESISTANCE PER SECTION100.000 KILOHMS SINGLE SECTION"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG1265.0 NOMINAL"
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25/+0.25 SINGLE SECTION"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION"
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY"
CRJSFIXED TAP QUANTITY PER SECTION1 SINGLE SECTION"
CRKSTAP LOCATION TOLERANCE PER SECTION-5.0/+5.0 OHMS SINGLE SECTION"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-1.0/+1.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSBWTAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS5000.0 SINGLE SECTION"
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR"
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0/+20.0 SINGLE SECTION"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
TTQYTERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG"
AAPNSECTION QUANTITY1"
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
AAVLPILOT DIAMETER0.4400 INCHES NOMINAL"
AAVMPILOT LENGTH0.0400 INCHES NOMINAL"
ABHPOVERALL LENGTH2.032 INCHES MAXIMUM"
ABPAUNDERCUT DIAMETER0.440 INCHES MAXIMUM"
ABPCUNDERCUT WIDTH0.0570 INCHES NOMINAL"
ABPMBODY DIAMETER0.510 INCHES MAXIMUM"
ABWVSHAFT DIAMETER0.125 INCHES MAXIMUM"
ABXFSHAFT LENGTH0.470 INCHES MAXIMUM"
ADAQBODY LENGTH1.272 INCHES MAXIMUM"
ADAVOVERALL DIAMETER0.510 INCHES MAXIMUM"
AECZMOUNTING LIP DIAMETER0.5000 INCHES NOMINAL"
AEDAMOUNTING LIP DEPTH0.0620 INCHES NOMINAL"
AEDXSHAFT STYLEROUND, SLOTTED"
AEDZSHAFT BEARING TYPEBALL"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION1080.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE0.60 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE0.40 INCH-OUNCES"
AEFMMAXIMUM STOP TORQUE100.00 INCH-OUNCES"
AEFZSHAFT RUNOUT0.001 INCHES"
AEGALATERAL RUNOUT0.001 INCHES"
AEGCSHAFT RADIAL PLAY0.001 INCHES"
APXHTERMINAL LOCATIONREAR END"
AXGYMOUNTING METHODCLAMP RING"
CQCCELECTRICAL RESISTANCE PER SECTION100.000 KILOHMS SINGLE SECTION"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG1265.0 NOMINAL"
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25/+0.25 SINGLE SECTION"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION"
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY"
CRJSFIXED TAP QUANTITY PER SECTION1 SINGLE SECTION"
CRKSTAP LOCATION TOLERANCE PER SECTION-5.0/+5.0 OHMS SINGLE SECTION"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-1.0/+1.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSBWTAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS5000.0 SINGLE SECTION"
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR"
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0/+20.0 SINGLE SECTION"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
TTQYTERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG"

  Corresponding National Stock Number to MD05-03X2-3162

USA Flag

We are proud to supply every branch of the United States military


Why Choose Us?

Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable parts

Semiconductor's Certifications and Memberships

Thank You for Visiting.

We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

The only independent
distributor with a
NO CHINA SOURCING Pledge
  • All parts are stocked in the USA.
  • All parts are shipped from the USA.
  • All shipments must comply with U.S.A export laws.
  • No exceptions.
Fhf “We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.