Whether you are in need of military aviation parts, NSN components, or various forms of aerospace and defense parts, Aerospace Store is a single-sourcing solution with over 2 billion product listings readily available for purchase at any time with competitive pricing. You have reached the Request for Quote (RFQ) page for part number 6064, a Sensor Systems Inc component we feature that is listed with the NSN 5905010930705 and item name “Resistor Variable Wire Wound Pre.” For further identification, part number 6064 was also specifically produced under CAGE Code 04454 and belongs to Federal Supply Class (FSC) 5905 Resistors. If you would like to receive specific options for procurement that have been tailored to your unique needs and restrictions alike, we ask that you please fill out and submit the form provided on this page with as much information as you can. Once our team has a chance to receive and review your offered details, a dedicated account manager will be in touch shortly after.
Note : We will not share your information to any third parties.
Items like part number 6064 and others are all readily available with short lead times, and we boast rigorous quality-assurance practices to guarantee the caliber and reliability of every purchase made on our website. Beyond quality, we are fully committed to customer satisfaction, regularly exceeding industry expectations to ensure that we thoroughly and efficiently address every need. If you happen to be facing a time constraint that demands more specialized fulfillment solutions, please give us a call or email at any time to discuss the options we can provide. We are available around the clock and are always happy to assist, so do not hesitate to reach out for part number 6064 and other various items of interest.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-093-0705 Item Description: Resistor Variable Wire Wound Pre | 5905 | 010930705 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 6064 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.6250 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.361 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.875 NOMINAL CENTIMETERS" |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.580 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.062 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 NOMINAL INCHES" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM" |
| AEFK | MAXIMUM STARTING TORQUE | 0.40 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES" |
| AEFM | MAXIMUM STOP TORQUE | 96.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF" |
| CBME | III CUBIC MEASURE | 0.950 CUBIC INCHES" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 128.57 SINGLE SECTION AND 257.14 SINGLE SECTION AND 385.71 SINGLE SECTION AND 514.29 SINGLE SECTION AND 642.86 SINGLE SECTION AND 771.43 SINGLE SECTION AND 900.0 SINGLE SECTION AND 1028.57 SINGLE SECTION AND 1157.14 SINGLE SECTION AND 1285." |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.00071/+0.00071 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 7TH SECONDARY QUALITY" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 27 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0/+2.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK 11TH PRIMARY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| FEAT | SPECIAL FEATURES | SHAFT HAS GEAR,14 TEETH,127 PITCH,20 DEG P.A.,0.1102 IN. MAX DIA,FULL TOOTH 0.187 TO 0.218" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 1.200 GOLD GRAINS, TROY" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 56910-10004-101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 30 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.6250 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.361 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.875 NOMINAL CENTIMETERS" |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.580 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.062 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 NOMINAL INCHES" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM" |
| AEFK | MAXIMUM STARTING TORQUE | 0.40 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES" |
| AEFM | MAXIMUM STOP TORQUE | 96.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF" |
| CBME | III CUBIC MEASURE | 0.950 CUBIC INCHES" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 128.57 SINGLE SECTION AND 257.14 SINGLE SECTION AND 385.71 SINGLE SECTION AND 514.29 SINGLE SECTION AND 642.86 SINGLE SECTION AND 771.43 SINGLE SECTION AND 900.0 SINGLE SECTION AND 1028.57 SINGLE SECTION AND 1157.14 SINGLE SECTION AND 1285." |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.00071/+0.00071 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 7TH SECONDARY QUALITY" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 27 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0/+2.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK 11TH PRIMARY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| FEAT | SPECIAL FEATURES | SHAFT HAS GEAR,14 TEETH,127 PITCH,20 DEG P.A.,0.1102 IN. MAX DIA,FULL TOOTH 0.187 TO 0.218" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 1.200 GOLD GRAINS, TROY" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 56910-10004-101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 30 TURRET" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
